User's Manual

ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch
Internet Access 3-19
Table 3-7 Roaming Configuration Field Descriptions
FIELD DESCRIPTION
Active
Press [SPACE BAR] and then [ENTER] to select Yes to allow roaming on the ZyAIR Press
[SPACE BAR] and then [ENTER] to select Yes to enable roaming on the ZyAIR if you have
two or more ZyAIRs on the same subnet..
Port # Enter the port number to communicate roaming information between access points. The
port number must be the same on all access points. The default is 16290. Make sure this
port is not used by other services.
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to confirm or ESC to
cancel” to save your configuration or press [ESC] to cancel and go back to the previous screen.