User's Manual

ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch

3-12 Internet Access

3.10 Internet Access Setup

From the main menu, type 4 to display Menu 4 – Internet Access Setup, as shown next.

Figure 3-7 Internet Access Setup

The following table contains instructions on how to configure your ZyAIR for Internet access.

Table 3-5 Internet Access Setup Menu Fields

FIELD DESCRIPTION EXAMPLE

ISP’s Name Enter the name of your Internet Service Provider. This information is

for identification purposes only.

MyISP

Encapsulation

Press [SPACE BAR] to select the method of encapsulation used

by your ISP. Choices are PPPoE, PPP or Ethernet.

Ethernet

Service Type

This field is available if you select the Ethernet encapsulation.

Press [SPACE BAR] to select the service type then press [ENTER].

Choose a RoadRunner flavor if your ISP is using Time Warner's

RoadRunner; otherwise choose Standard. The User Name,

Password and Login Server fields are not applicable (N/A) for the

latter.

Choose from Standard, Telstra (RoadRunner Telstra or BigPond

authentication method), RR-Manager (RoadRunner Manager

authentication method) or RR-Toshiba (RoadRunner Toshiba

authentication method).

Standard

Menu 4 - Internet Access Setup

ISP's Name= ChangeMe

Encapsulation= Ethernet

Service Type= Standard

My Login= N/A

My Password= N/A

IP Address Assignment= Dynamic

IP Address= N/A

IP Subnet Mask= N/A

Gateway IP Address= N/A

Network Address Translation= SUA Only

Press ENTER to Confirm or ESC to Cancel: