User's Manual

ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch
2-16 Hardware Installation and Initial Setup
From the main menu, enter 2 to display Menu 2-WAN Setup screen as shown.
Figure 2-10 Menu 2 – WAN Setup
The following table describes the fields in this screen.
Table 2-7 WAN Setup Field Descriptions
FIELD DESCRIPTION EXAMPLE
MAC Address
Assigned By
Press [SPACE BAR] to select Factory default and press [ENTER] to
use the factory assigned MAC address.
Select IP address attached on LAN and enter the IP address in the
IP Address field below to clone the MAC address of the computer
on the Ethernet.
Factory default
IP Address Enter the IP address of the computer whose MAC address you are
cloning. This field is available if you select IP address attached on
LAN in the Assigned By field.
N/A
2.11 LAN Setup
This section describes how to configure the Ethernet using Menu 3 – LAN Setup. From the main menu,
enter 3 to display menu 3.
Menu 2 - WAN Setup
MAC Address:
Assigned By= Factory default
IP Address= N/A
Press ENTER to Confirm or ESC to Cancel: