User's Manual

ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch
Hardware Installation and Initial Setup 2-15
Follow the instructions in the next table to configure Dynamic DNS parameters.
2.10 WAN Setup
The MAC address field allows users to configure the WAN port's MAC Address by either using the factory
default or cloning the MAC address from a computer on your LAN. Once it is successfully configured, the
address will be copied to the rom file (ZyNOS configuration file). It will not change unless you change the
setting or upload a different rom file.
ZyXEL recommends you clone the MAC address from a workstation on your LAN
even if your ISP does not require MAC address authentication.
Table 2-6 Configure Dynamic DNS Menu Fields
FIELD DESCRIPTION EXAMPLE
Service Provider This is the name of your Dynamic DNS service provider. WWW.DynDNS.ORG
(default)
Active
Press [SPACE BAR] to select Yes and then press [ENTER] to
make dynamic DNS active.
Yes
DDNS Type Select the type of service that you are registered for from your
Dynamic DNS service provider.
Dynamic DNS
(default)
Host Enter the domain name assigned to your ZyAIR by your
Dynamic DNS provider.
me.dyndns.org
EMAIL Enter your e-mail address. mail@mailserver
USER Enter your user name.
Password Enter the password assigned to you.
Enable Wildcard Your ZyAIR supports DYNDNS Wildcard. Press [SPACE BAR]
and then [ENTER] to select Yes to activate wildcard. This field
is N/A when you choose DDNS client as your service provider.
No
Offline
This option is available when CustomDNS is selected in the
DDNS Type field. Check with your Dynamic DNS service
provider to have traffic redirected to a URL (that you can
specify) while you are off line.
N/A
When you have completed this menu, press [ENTER] at the prompt “Press ENTER to Confirm…” to save
your configuration, or press [ESC] at any time to cancel.