User's Manual

ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch
9-2 System Information and Diagnosis
Figure 9-2 Menu 24.1 – System Maintenance – Status
The following table describes the fields present in Menu 24.1 – System Maintenance – Status which are
read-only and meant for diagnostic purposes.
Table 9-1 System Maintenance
– Status Menu Fields
FIELD DESCRIPTION
Port This is the port type. Port types are: LAN, WAN and WLAN
Status Shows the status of the port.
TxPkts The number of transmitted packets to this remote node.
RxPkts The number of received packets from this remote node.
Cols The number of collisions on this connection.
Tx B/s Shows the transmission rate in bytes per second.
Rx B/s Shows the receiving rate in bytes per second.
Up Time Time this channel has been connected to the current remote node.
Ethernet Address Shows the MAC address of the port.
IP Address Shows the IP address of the network device connected to the port.
IP Mask Shows the subnet mask of the network device connected to the port.
DHCP Shows the DHCP setting (None, Relay or Server) of the network device connected
to the port.
System Up Time The time the ZyAIR is up and running from the last reboot.
Menu 24.1 - System Maintenance - Status 04:27:14
Sat. Jan. 01, 2000
Port Status TxPkts RxPkts Cols Tx B/s Rx B/s Up Time
WAN 100M/Full 2138 0 0 0 0 4:27:12
LAN 100M/Full 1205 1762 0 0 0 4:27:12
WLAN 11M 656 354 0 0 0 4:27:12
Port Ethernet Address IP Address IP Mask DHCP
WAN 00:A0:C5:00:15:38 0.0.0.0 0.0.0.0 Client
LAN 00:A0:C5:00:15:37 192.168.1.1 255.255.255.0 Server
WLAN 00:A0:C5:00:15:37
System up Time: 4:27:18
Press Command:
COMMANDS: 1-Drop WAN 9-Reset Counters ESC-Exit