User's Manual

ZyAIR B-2000 Wireless LAN Gateway with 4-Port Switch
NAT 6-17
6.5.2 Example 2: Internet Access with an Inside Server
Figure 6-14 NAT Example 2
In this case, you do exactly as above (use the convenient pre-configured SUA Only set) and then go to
menu 15.2 to specify the Inside Server behind the NAT as shown in the next figure.
Figure 6-15 Menu 15.2.1 - Specifying an Inside Server
Menu 15.2 - NAT Server Setup
Rule Start Port No. End Port No. IP Address
---------------------------------------------------
1. Default Default 192.168.1.10
2. 0 0 0.0.0.0
3. 0 0 0.0.0.0
4. 0 0 0.0.0.0
5. 0 0 0.0.0.0
6. 0 0 0.0.0.0
7. 0 0 0.0.0.0
8. 0 0 0.0.0.0
9. 0 0 0.0.0.0
10. 0 0 0.0.0.0
11. 0 0 0.0.0.0
12. 1027 1027 RR Reserved
Press ENTER to Confirm or ESC to Cancel: