Datasheet

3Datasheet WRE6602
System Specifications
Wireless Standard
802.11 a/b/g/n/ac
Wireless Speed
Transmit: 300 Mbps* for 2.4 GHz and
867 Mbps* for 5 GHz
Receive: 300 Mbps* for 2.4 GHz and
867 Mbps* for 5 GHz
Wireless Security
64/128 bit WEP, WPA-PSK/WPA2-PSK
Wireless Features
Access point mode/Repeater mode
WiFi Protected Setup (WPS)
WiFi Multimedia (WMM)
Auto channel selection
System Management
Online firmware upgrade
Hardware Specifications
LAN: One 10/100 Mbps Ethernet RJ-45
port with auto MDI/MDIX support
• LED indicators:
Power (Green)
WiFi signal (Green-Good/Red-Bad)
Smart push (Green)
LAN (Green)
• Button:
Smart push
Power on/off
Switch: AP/Repeater mode
• Power:
Input: 100V to 240V AC, 50/60 Hz
Physical Specifications
Item dimensions (WxDxH):
46.5 x 62.3 x 90.9 mm
(1.83" x 2.45" x 3.57")
Item weight: 103g (0.23 lb.)
Packing dimensions (WxDxH):
155 x 75 x 135 mm
(6.10" x 2.95" x 5.31")
Packing weight: 285g (0.63 lb.)
Environmental Specifications
Operating Environment
• Temperature:
0°C to 40°C (32°F to 104°F)
• Humidity:
10% to 90% (Non-condensing)
Storage Environment
• Temperature:
-30°C to 70°C (-22°F to 158°F)
• Humidity:
10% to 95% (Non-condensing)
Certifications
Safety: CE LVD
EMC: CE
Package Contents
Wireless range extender
• Quick start guide
(including warranty form)
• Safety and DoC
* The maximum wireless data transfer rates of up
to 300 Mbps at 2.4 GHz and 867 Mbps at 5 GHz
in simultaneous transmission are derived from
the IEEE Standard 802.11 specifications. Actual
data transfer rates may vary from network
conditions including: distance, network traffics,
building site material/construction, interference
from other wireless devices and other adverse
factors.
Specifications
Location indicators
Separating traffic within a business such as isolating
resources between network administrators and general
users or between employees and public guest users.
Two WiFi modes
Supports both for extending your existing WiFi network
(repeater mode) or creating a stand-alone powerful WiFi
network (access point mode).