User's Manual

VSG-1200 User’s Guide
Chapter 5 NAT Pool 69
5.4 Configuring NAT Pool
To set the NAT address pool, click System Setting and NAT Pool in the navigation panel. A
screen displays as shown next.
Figure 27 System Setting: NAT Pool
The following table describes the labels in this screen.
Table 15 NAT Example: One-to-One and Many-to-One
SUBSCRIBER ORIGINAL SOURCE IP TRANSLATED SOURCE IP
S1 10.59.1.2 211.21.21.2
S2 10.59.1.3 211.21.21.2
S3 10.59.1.4 211.21.21.3
Note: You only need to set the NAT address pool if the remote VPN server(s)
allows only one connection per source IP address.
Note: You need to acquire additional public IP address(es) from your ISP to
create NAT pool(s).