User's Manual

VSG-1200 User’s Guide
62 Chapter 4 LAN, WAN and Server Setup
Figure 23 System Setting: Server
The following table describes the labels in this screen.
Table 10 System Setting: Server
LABEL DESCRIPTION
Web Server
Server Port Specify the port number of the embedded web server on the VSG for
accessing the web configurator. The default port number is 80.
Enter a number between 8010 and 8060 to access the web configurator
behind a NAT-enabled network. If you enter a number between 8010
and 8060, you need to append the port number to the WAN or LAN port
IP address to access the web configurator. For example, if you enter
“8010” as the web server port number, then you must enter “http://
www.192.168.1.1:8010” where 192.168.1.1 is the WAN or LAN port IP
address.
SSL Security Secure Socket Layer (SSL) security allows you to create a
secure connection between the VSG and the client computer(s). Refer to
Chapter 25, “Secure Socket Layer,” on page 189 for more information.
Select this option to activate SSL security. By default, SSL login security
is disabled.
Administrator Idle-Timeout Specify how many minutes (between 1 and 1440) the web configuration
can be left idle before the session times out. After it times out you have
to log in with your username and password again. Very long idle
timeouts may have security risks.
Note: This does NOT apply to the SMT management
session.