User's Manual

VSG-1200 User’s Guide
Chapter 3 The Web Configurator 49
The following table describes the labels in this screen.
3.8 Resetting the VSG
Follow the steps below to reset the VSG back to the factory default settings.
1 Click System Tools, Configuration to display the screen as shown next.
Table 4 System Tools: System Account
LABEL DESCRIPTION
Administrator
Account
This account permits full access to all system configurations.
Username Enter the user name for the administrative account. The default is admin.
Password Enter a new administrative account password.
Confirm Enter the new administrator password again for confirmation.
Accounting Manager This account allows you to set up subscriber accounts. No system configuration
is allowed.
Username Enter the user name for the account manager account. The default is account.
Password Enter a new account manager password.
Confirm Enter the new account manager password again for confirmation.
Supervisor Account This account allows you to view system status only.
Username Enter the user name for the supervisor account. The default is supervisor.
Password Enter a new supervisor password.
Confirm Enter the new supervisor password again for confirmation.
Super Subscriber
Account
You can use this account to test Internet connection between a computer
behind the VSG to the ISP. No time limit or billing is imposed on this account.
Username Enter the user name for the super subscriber account. The default is super.
Password Enter a new super subscriber account password.
Confirm Enter the new super subscriber account password again for confirmation.
Apply Click Apply to save the changes back to the VSG.
Note: All your custom configuration will be erased once you reset the VSG.
You may choose to keep the subscriber account information and the port-
location mapping settings.