User's Manual

VSG-1200 User’s Guide
Chapter 27 LAN and WAN Setup Using the SMT 207
CHAPTER 27
LAN and WAN Setup Using the
SMT
This chapter shows you how to configure the LAN and WAN settings on the VSG.
27.1 LAN and WAN Overview
Refer to Chapter 4, “LAN, WAN and Server Setup,” on page 53 for more information.
27.2 WAN Configuration
From the main menu, type 1 and press [ENTER] to display the System Configuration menu.
The WAN Configuration menu varies depending on the selection in the WAN Typ e field.
27.2.1 Using a Static/Dynamic WAN IP Address
You can set the VSG to use a static (fixed) or dynamic IP address.
Figure 143 SMT: WAN Configuration: Static or Dynamic IP Address
WAN Configuration
WAN Type? (D/S/P/T) :S
IP Address :192.168.1.1
Subnet Mask :255.255.255.0
Gateway :192.168.1.254
Primary DNS Server :168.95.1.1
Secondary DNS Server :