User's Manual

Status Registers & Result Codes 103
Command bit dec hex Function and description Ref.
128 80 Enable type 2 security with
password check and call-
back.
*G4
160 A0 Enable type 2 security with
password check and call-
back, remote site enters the
call-back number.
*G5
S37= bit dec hex Bit-mapped register for
remote configuration using
panel menu control.
+000
3-0 0-5 0-5 Remote profile number. *Wab
7-4 0-80 0-50 Local profile number. *Rab
S38= bit dec hex Bit mapped register. +000
0 1 1 Repeatedly dialing default
number.
*Dn
S29
3 8 8 DCD ON/OFF sequence
follows UNIX standard,
DCD high before connect
message is sent, DCD off
after last DCE response is
sent.
&C1
S21.4
4 16 10 Auto-mode fax receiving
disabled.
&N0
5 32 20 Disable MNP5. &Kn
S39= bit dec hex Bit mapped register. +000
2 4 4 Answer in originating mode. ATA
3 8 8 Class 2 Fax Bitfax
compatibility:
+FCON at 2400 next phase
at 19200.
4 16 10 Class 2 Fax mode DTE
shifting: