Prestige 660RU Series ADSL2+ Ethernet/USB Gateway Quick Start Guide Version 3.
Prestige 660RU Series Quick Start Guide Introducing the Prestige The Prestige 660RU ADSL2+ USB/Ethernet Gateway is the ideal all-in-one device for small networks connecting to the Internet via ADSL. Provided with both USB and Ethernet ports, computers can share local resources (such as printers and files) and access to the Internet - simultaneously. See your User’s Guide for more details on all Prestige features.
Prestige 660RU Series Quick Start Guide Hardware Connections 1. Connect the Prestige to a telephone jack using a telephone wire. 2. Use an Ethernet cable to connect a computer to the LAN 10/100M port for initial configuration and/or Internet access. 3. If you have a USB-enabled computer that does not have a network interface card for attaching to your Ethernet network, connect the computer to the USB port with a USB cable. Refer to the Installing the USB Driver section. 4.
Prestige 660RU Series Quick Start Guide successful. The appropriate LAN and/or USB LEDs turn on if they are properly connected. See your User’s Guide for detailed LED descriptions. Zero Configuration Internet Access Once you connect and turn on the Prestige, it automatically detects the Internet connection settings from the ISP and makes the necessary configuration changes. 1. Wait until the DSL LED turns steady on. Launch your web browser and navigate to a web site (for example, www.zyxel.com).
Prestige 660RU Series Quick Start Guide If an Internet access parameter is changed, either restart the device to have the Prestige automatically reconfigure your Internet connection or change it manually in the Wizard screens of the web configurator (see your User’s Guide for details). Prestige Factory Defaults This Quick Start Guide provides a basic configuration that should be compatible with your home or small office network setup. Refer to the User’s Guide for additional configuration instructions.
Prestige 660RU Series Quick Start Guide 4. A Welcome screen displays, click Next. 5. Click Yes to agree to the license agreement.
Prestige 660RU Series Quick Start Guide 6. When a Start Copying Files screen displays, click Next to continue. 7. Windows 98 SE/Me: Select Yes, I want to restart my computer now. and click OK.
Prestige 660RU Series Quick Start Guide Windows 2000/XP: Connect the Prestige to the computer’s USB port when prompted. A window displays briefly, indicating that the system has found new hardware. 8. Windows XP: If a warning window displays, click Continue Anyway.
Prestige 660RU Series Quick Start Guide 9. Click Finish to complete the installation. Restart the computer if prompted. 10. Windows 98 SE/Me: After the computer finishes restart, connect the square end of the USB cable to the back of your Prestige and connect the rectangular end of the USB 6cable to the back of your computer. A window displays briefly, indicating that the system has found new hardware. 11. Windows 2000/XP: The login screen of the Prestige web configurator appears automatically.
Prestige 660RU Series Quick Start Guide Mac System Requirements • Macintosh operating system versions 10.1 and later • An available USB port Install the USB driver before you connect the Prestige to the USB port. Screen shots for Macintosh 10.3 are shown in the following procedure unless otherwise specified. The screens on your computer may differ slightly from the screens shown here depending on the version of your operating system. 1. Close all programs and applications 2.
Prestige 660RU Series Quick Start Guide 6. Double-click P660RU-Tx.pkg to install the driver. 7. A welcome screen appears. Click Continue. 8. You will then see the Select a Destination screen, select a destination (this must be on an actual physical hard drive on the Macintosh, not a virtual drive) and click Continue.
Prestige 660RU Series Quick Start Guide 9. Click Upgrade. 10. You then see a screen telling you that you must restart the computer after the installation completes. Click Continue Installation. The driver will automatically install. 11. Click Restart to reboot your computer and complete the driver installation.
Prestige 660RU Series Quick Start Guide Troubleshooting PROBLEM The PWR/SYS LED is off. CORRECTIVE ACTION Make sure the Prestige is connected to the correct power adaptor, the power adaptor is connected to an adequate power supply and the Prestige power switch is turned on. Turn the Prestige off and on. If the error persists, you may have a hardware problem. In this case, you should contact your local vendor. The 10/100M LED won’t turn on. Check the cable connection to the Prestige LAN 10/100M port.
Prestige 660RU Series Quick Start Guide PROBLEM CORRECTIVE ACTION The USB LED is off or Windows does not autodetect the USB connection to the Prestige. Make sure the Prestige is turned on and connected to the USB port on the computer. Perform a hardware scan by clicking Start, Settings, Control Panel and double-clicking Add/Remove Hardware. (Steps may vary depending on the version of Windows). Follow the on-screen instructions to search for the Prestige and install the driver.
