User's Manual

Prestige P645 ADSL Internet Access Router
6-4 IPX Configuration
6.3 IPX Ethernet Setup
From Menu 3 - Ethernet Setup, enter 3 to go to Menu 3.3 - Novell IPX Ethernet Setup as shown in the
figure below.
Figure 6-3 Menu 3.3 - Novell IPX Ethernet Setup
The following table describes the Novell IPX Ethernet Setup Menu.
Table 6-1 Novell IPX Ethernet Setup Fields
FIELD DESCRIPTION EXAMPLE
Seed Router
Select Yes or No to determine if your Prestige 645R
is to act as a seed router.
No
Frame Type Enable/Disable the individual frame type.
Remember to enable only the ones that are actually
used on your network. 802.2, 802.3, Ethernet II and
SNAP
No
IPX Network
#
If your Prestige 645R is a seed router, enter a
unique network number for each frame type enabled.
N/A
Press [ENTER] at the message [Press ENTER to Confirm ...] to save your
configuration, or press [ESC] at any time to cancel.
Menu 3.3 - Novell IPX Ethernet Setup
Seed Router= No
Frame Type 802.2= Yes
IPX Network #= N/A
Frame Type 802.3= No
IPX Network #= N/A
Frame Type Ethernet II= No
IPX Network #= N/A
Frame Type SNAP= No
IPX Network #= N/A
Enter here to CONFIRM or ESC to CANCEL:
Press Space Bar to Toggle.