User's Manual

Prestige P645 ADSL Internet Access Router
Remote Node TCP/IP Configuration 5-9
Figure 5-9 Menu 12.1 - IP Static Route Setup
Figure 5-10 Menu 12.1.1 - Edit IP Static Route
The following table describes the fields for Menu 12.1.1 – Edit IP Static Route Setup.
Table 5-3 Edit IP Static Route Menu Fields
FIELD DESCRIPTION
Route Name Enter a descriptive name for this route. This is for identification purposes only.
Active
Use the [SPACE BAR] to select Yes to activate or No to deactivate this static route.
Destination IP
Address
This parameter specifies the IP network address of the final destination. Routing is
always based on network number. If you need to specify a route to a single host, use
a subnet mask of 255.255.255.255 in the subnet mask field to force the network
number to be identical to the host ID.
IP Subnet Mask Enter the subnet mask for this destination.
Gateway IP
Address
Enter the IP address of the gateway. The gateway is an immediate neighbor of your
Prestige that will forward the packet to the destination. On the LAN, the gateway must
be a router on the same segment as your Prestige; over WAN, the gateway must be
the IP address of one of the remote nodes.
Menu 12.1.1 - Edit IP Static Route
Route #: 1
Route Name= Tokyo
Active= No
Destination IP Address= ?
IP Subnet Mask= ?
Gateway IP Address= ?
Metric= 2
Private= No
Press ENTER to Confirm or ESC to Cancel:
Menu 12.1 - IP Static Route Setup
1. Tokyo
2. Seoul
3. Taipei
4. ________
5. ________
6. ________
7. ________
8. ________
Enter selection number: