User's Manual

Prestige P645 ADSL Internet Access Router
Remote Node Configuration 4-3
FIELD DESCRIPTION EXAMPLE
Rem Node Name This is a required field [?]. Enter a descriptive name for the
remote node, for example, “Changeme”. This field can be up to
eight characters. This name must be unique from any other
remote node name.
Changeme
Active
Press the [SPACE BAR] to select either Yes or No. Inactive
nodes are displayed with a minus sign (-) at the beginning of
the name in menu 11.
No
Encapsulation=
PPP refers to RFC 2364, "PPP Encapsulation over ATM
Adaptation Layer 5". If RFC 1483 ("Multiprotocol Encapsulation
over ATM Adaptation Layer 5") or ENET ENCAP are selected,
then the Rem Login, Rem Password, My Login, My
Password, Edit PPP Options and Authen fields will not be
applicable (N/A). Moreover, ENET ENCAP encapsulation does
not apply for IPX routing.
PPP
Multiplexing=
Press the [SPACE BAR] to select either VC-based or
LLC-based multiplexing.
LLC-based
Incoming: Rem
Login
Name
Enter the login name that this remote node will use when it calls
your Prestige.
The login name in this field combined with the Rem Node
Password will be used to authenticate this node.
bucket
Incoming: Rem
Password
Enter the password used when this remote node calls your
Prestige.
***
Outgoing: My Login Enter the login name for your Prestige when it calls this remote
node.
oscar
Outgoing: My
Password
Enter the password for your Prestige when it calls this remote
node.
***
This field sets the authentication protocol used for outgoing
calls.
Options for this field are:
CHAP/PAP - Your Prestige will accept either CHAP or PAP
when requested by this remote node.
CHAP/PAP
CHAP - accept CHAP only.
Outgoing: Authen
PAP - accept PAP only.
Route This field determines the protocols that your Prestige will route.
Options are IP, IPX, IP+!PX and None; although with ENET
IP