User's Manual

Prestige 1600 Universal Access Concentrator

WAN Port Setup

4-1

Chapter 4

WAN Port Setup

This section describes setting up your WAN port including Frame Relay.

Select option 2 from the Main Menu by typing 2 at the menu selection number prompt. You will see a screen as

shown next.

Figure 4-1 Menu 2 - WAN Port Setup

Table 4-1 WAN Setup Menu Fields

Field Description Example

Clock Source The device connected to the WAN port controls timing. The

P1600 currently only supports an external clock source.

External

Port Speed Set by External Device

N/A

Edit Frame Relay

Setup

To configure the WAN port for frame relay move the cursor

to the Edit Frame Relay Setup= field, press the

[SPACEBAR] once to display Yes and then press

[ENTER]. This takes you to Menu 2.1.2 - Frame Relay

Setup shown ahead.

4.1 Configuring The WAN Port For PPP over HDLC

The following diagram depicts the configuration scenario for running PPP over HDLC (High-level Data Link

Control).

Menu 2 - WAN Port Setup

Clock Source = External

Port Speed = N/A

Edit Frame Relay Setup= No

Press Enter to Confirm or ESC to Cancel:

Only change the default option

(No) if you wish to configure the

WAN

ort for frame rela