User's Manual

Prestige 1600 Universal Access Concentrator
D
CI Commands
DSL related CI Commands
CI Command Options Description
xdsl cnt disp chann name|scc2|scc4 Display idsl channel/line counter
clear chann name|scc2|scc4 Clear idsl channel/line counter
test disp packet 0|1|2 Set packet display mode in testing
event chann name on|off Set event display mode in testing
inernal chann name cnt Do internal loopback
external chann name cnt Do external loopback
event disp Display ZyNOS event
clear Clear ZyNOS event
netstat chann name Display network state
reset chann name Reset channel
drop chann name Drop channel
version Display NDIS version
debug on|off Enable/disable debug. If enable and system crash,
system will reboot and stop at BootExt
dpram system line name Display system descriptor
parameter line name Display channel parameters
inttable line name Display interrupt table
bd chann name Display buffer descriptor
bf chann name Display buffer
idsl rci chann name|all Read layer1 CI code
wci chann name CI code [up] Write layer 1 CI code (up for upstream)
rmon chann name|all Read layer1 Monitor code
wmon chann name mon code 1 mon
code 2
Write layer1 Monitor code
status chann name Display layer1 near-end and far-end error count
setbw chann name 1:128K, 2:64K Set layer1 bandwidth
parameter scc2|scc4 Display SCC parameters
inttable scc2|scc4 Display interrupt table
chantable chann name Display channel parameter table
bd chann name Display buffer descriptor
bf chann name Display buffer
modem xx Modem related CI command
xdsl xx xDSL related CI command