P-2000W_V2 VoIP Wi-Fi Phone Quick Start Guide Version WV.00.
P-2000W_V2 Quick Start Guide Overview The Prestige 2000W_V2 is a wireless Voice over IP (VoIP) telephone. It combines the benefits of Internet telephony, like cheaper calls, with mobility. Make and receive calls as long you are within range of an IEEE 802.11b or IEEE 802.11g wireless network. This guide covers how to configure and use your Prestige to make phone calls through the Internet. See the User’s Guide for more information on all features.
P-2000W_V2 Quick Start Guide NAME DESCRIPTION 1 LCD Screen Use this screen to display information and navigate the phone’s menus. 2 Left Key Use the Left key to open the on-screen menus and select options. 3 Right Key Use the Right key to return to the previous menu. It is also a shortcut to the phone book. 4 Arrow Keys Use the arrow keys to navigate between menus and move the cursor. Use the left arrow key to clear text in an editable field.
P-2000W_V2 Quick Start Guide 1 Charging Your Phone Do the following to charge the Prestige for use. 1 Remove the battery cover. Press the silver button on the back of the Prestige and slide the battery cover with your other hand. 2 Insert the battery. With the battery’s CE label facing up, put the end with the contacts in first and press the battery down into place. 3 Place the battery cover back on. Slide the cover towards the top until it clicks into place.
P-2000W_V2 Quick Start Guide 2 Connecting to a Wireless Network Press the Power/End key for two seconds to turn on the Prestige. The Prestige searches for the available wireless network with the best signal. It then restarts and attempts to connect to the wireless network. If the LCD screen displays Not Registered, the Prestige is connected to the Internet and you can skip to Section 4. 12:00 ZyXEL Note: If the LCD screen displays Registered, skip to Section 5.
P-2000W_V2 Quick Start Guide 2.1 Setting the Prestige to Use a WEP Key WEP (Wired Equivalent Privacy) encryption scrambles wireless communications to keep them private. Do the following if you were given a WEP key to use, otherwise skip to Section 2.2. 1 Use the down arrow key to scroll to WEP Select and press the OK key. 6. WEP Select 7. Profiles 8.
P-2000W_V2 Quick Start Guide 8 Scroll to Key Select and press the OK key. 11. Key Select 12. Profiles 13. Auth Type Select 9 Use the down arrow key and the OK key to select the key that the wireless network is using. Back Key 1 Key 2 Key 3 Select Back 2.2 Restarting Your Prestige Press the Right key twice to save your settings and return to the main screen. An hourglass appears on the LCD screen and the Prestige restarts.
P-2000W_V2 Quick Start Guide 2 Use the down arrow key to scroll to Net Settings and press the Left key). 4. Net Settings 5. SIP Settings 6. Settings Select Back 3 Scroll to Network Mode and press the OK key. 1. Network Mode If you were given an IP address and subnet mask, go to Section 3.1. If you were given a user name and password for Internet access, go to Section 2. IP Address 3.2. 3. Subnet Mask Select Back 3.
P-2000W_V2 Quick Start Guide 5 Use the keypad to enter your subnet mask. Use the Power/End key to clear the Subnet Mask default text and remove typos. Press the OK key when you are done. 255.255.255.0 Ok 6 Scroll to Gateway and press the OK key. Aa 1 @ Clear 4. Gateway 1. Network Mode 2. IP Address Select Back 7 Use the keypad to enter the IP address of your gateway. Use the Power/End Gateway key to clear the default text and remove typos. Press the OK key when you are 192.168.1.2 done.
