User Manual
Table Of Contents
- ARMOR G5
- User’s Guide
- Introduction
- Wizard
- The Web Configurator
- NBG7815 Modes
- Standard Mode
- Bridge Mode
- Tutorials
- 7.1 Overview
- 7.2 Run a Speed Test
- 7.3 Configure the NBG7815’s WiFi Networks
- 7.4 Enable or Disable a WiFi Network
- 7.5 Add Clients to a Profile
- 7.6 Set a Profile’s WiFi Schedule
- 7.7 Pause or Resume Internet Access on a Profile
- 7.8 Turn on or off the NBG7815’s LED (Light)
- 7.9 Change Your NBG7815 Operating Mode
- 7.10 Configure a Port Forwarding Rule
- Technical Reference
- Applications
- WAN
- Wireless LAN
- LAN
- Security
- System
- Troubleshooting
- Customer Support
- Setting Up Your Computer’s IP Address
- Common Services
- Legal Information
- Index
Chapter 8 Applications
NBG7815 User’s Guide
61
Figure 22 Add New Profile
The following table describes the fields in this screen.
Table 10 Add New Profile
LABEL DESCRIPTION
Profile Name Enter a name for this rule.
Select All Click Select All then deselect the blocks you don’t want or click on blocks
separately to specify days and times to turn the Wireless LAN on or off.
Deselect All Click Deselect All to remove all the wireless LAN scheduling.
Apply Click Apply to save your changes back to the NBG7815.
Back Click Back to exist the screen without saving.