User Manual
Table Of Contents
- ARMOR G5
- User’s Guide
- Introduction
- Wizard
- The Web Configurator
- NBG7815 Modes
- Standard Mode
- Bridge Mode
- Tutorials
- 7.1 Overview
- 7.2 Run a Speed Test
- 7.3 Configure the NBG7815’s WiFi Networks
- 7.4 Enable or Disable a WiFi Network
- 7.5 Add Clients to a Profile
- 7.6 Set a Profile’s WiFi Schedule
- 7.7 Pause or Resume Internet Access on a Profile
- 7.8 Turn on or off the NBG7815’s LED (Light)
- 7.9 Change Your NBG7815 Operating Mode
- 7.10 Configure a Port Forwarding Rule
- Technical Reference
- Applications
- WAN
- Wireless LAN
- LAN
- Security
- System
- Troubleshooting
- Customer Support
- Setting Up Your Computer’s IP Address
- Common Services
- Legal Information
- Index
Chapter 10 Wireless LAN
NBG7815 User’s Guide
107
Figure 55 Guest Wireless LAN Network
Guest WLAN Bandwidth
The Guest WLAN Bandwidth function allows you to restrict the maximum bandwidth for the guest
wireless network. Additionally, you can also define bandwidth for your home or office network. An
example is shown in the next figure to define maximum bandwidth for your networks (A is Guest WLAN
and N is a home or company network.)
Figure 56 Example: Bandwidth for Different Networks
WPS
WiFi Protected Setup (WPS) is an industry standard specification defined by the WiFi Alliance. WPS allows
you to set up a wireless network with strong security without having to configure security settings
manually. Depending on the devices in your network, you can either press a button (on the device itself,
or in its configuration utility) or enter a PIN (Personal Identification Number) in the devices. They then
connect and set up a secure network by themselves. See how to set up a secure wireless network using
WPS in Section 7.2 on page 43.