Instructions

Chapter 14 Maintenance
NBG6604 User’s Guide
97
14.9 Remote Management
Remote Management allows you to manage your NBG6604 from a remote location through the LAN/
WLAN or WAN interface.
14.9.1 Remote Access
Use this screen to change your NBG6604’s remote management settings. You can use Telnet, HTTP or
HTTPS to access and manage the NBG6604.
Click Maintenance > Remote Management > Remote Access to open the following screen.
Figure 64 Maintenance > Remote Management > Remote Access
The following table describes the labels in this screen.
Table 40 Maintenance > Remote Management > WAN Access
LABEL DESCRIPTION
WWW
Port You may change the server port number for a service if needed; however you must use the
same port number in order to use that service for remote management.
Access Status Select the interfaces through which a computer may access the NBG6604 using this service.
Secured Client IP
Address
Select All to allow all computes to access the NBG6604.
Otherwise, check Selected and specify the IP address of the computer that can access the
NBG6604.
Telnet
Telnet Select this to allow Telnet access.
Port You may change the server port number for a service if needed; however you must use the
same port number in order to use that service for remote management.
Access Status Select the interface(s) through which a computer may access the NBG6604 using this service.