Instructions

Chapter 14 Maintenance
NBG6604 User’s Guide
93
14.5 Time Screen
Use this screen to configure the NBG6604’s time based on your local time zone. To change your
NBG6604’s time and date, click Maintenance > Time. The screen appears as shown.
Figure 59 Maintenance > Time
The following table describes the labels in this screen.
Table 37 Maintenance > Time
LABEL DESCRIPTION
Current Time and Date
Current Time This field displays the time of your NBG6604.
Each time you reload this page, the NBG6604 synchronizes the time with the time server.
Current Date This field displays the date of your NBG6604.
Each time you reload this page, the NBG6604 synchronizes the date with the time server.
Time and Date Setup
Manual Select this radio button to enter the time and date manually. If you configure a new time
and date, Time Zone and Daylight Saving at the same time, the new time and date you
entered has priority and the Time Zone and Daylight Saving settings do not affect it.
New Time
(hh:mm:ss)
This field displays the last updated time from the time server or the last time configured
manually.
When you select Manual, enter the new time in this field and then click Apply.
New Date
(yyyy/mm/dd)
This field displays the last updated date from the time server or the last date configured
manually.
When you select Manual, enter the new date in this field and then click Apply.
Get from Time Server Select this radio button to have the NBG6604 get the time and date from the time server
you specified below.
User Defined Time
Server Address
Select User Defined Time Server Address and enter the IP address or URL (up to 20 extended
ASCII characters in length) of your time server. Check with your ISP/network administrator if
you are unsure of this information.
Time Zone Setup
Time Zone Choose the time zone of your location. This will set the time difference between your time
zone and Greenwich Mean Time (GMT).