Instructions

Chapter 14 Maintenance
NBG6604 User’s Guide
92
The following table describes the labels in this screen.
14.4 Password Screen
It is strongly recommended that you change your NBG6604's password.
If you forget your NBG6604's password (or IP address), you will need to reset the device. See Section 14.8
on page 96 for details.
Click Maintenance > Password. The screen appears as shown.
Figure 58 Maintenance > Password
The following table describes the labels in this screen.
Table 35 Maintenance > General
LABEL DESCRIPTION
System Name System Name is a unique name to identify the NBG6604 in an Ethernet network.
Domain Name Enter the domain name you want to give to the NBG6604.
Administrator
Inactivity Timer
Type how many minutes a management session can be left idle before the session times out.
The default is 5 minutes. After it times out you have to log in with your password again. Very
long idle timeouts may have security risks. A value of "0" means a management session
never times out, no matter how long it has been left idle (not recommended).
Apply Click Apply to save your changes back to the NBG6604.
Cancel Click Cancel to begin configuring this screen afresh.
Table 36 Maintenance > Password
LABEL DESCRIPTION
Old Password Type the default password or the existing password you use to access the system in this
field.
New Password Type your new system password (up to 30 characters). Note that as you type a password,
the screen displays an asterisk (*) for each character you type.
Retype to Confirm Type the new password again in this field.
Apply Click Apply to save your changes back to the NBG6604.
Cancel Click Cancel to begin configuring this screen afresh.