Instructions

NBG6604 User’s Guide
84
CHAPTER 12
Applications
12.1 Overview
This chapter shows you how to configure UPnP and One Connect.
12.1.1 What You Can Do
• Use the UPnP screen to enable UPnP on your NBG6604 (Section 12.2 on page 84).
• Use the One Connect screen to enable or disable Wi-Fi auto-configuration (Section 12.3 on page 85).
12.2 UPnP Screen
Universal Plug and Play (UPnP) is a distributed, open networking standard that uses TCP/IP for simple
peer-to-peer network connectivity between devices. A UPnP device can dynamically join a network,
obtain an IP address, convey its capabilities and learn about other devices on the network. In turn, a
device can leave a network smoothly and automatically when it is no longer in use.
Use this screen to enable UPnP on your NBG6604.
Click Applications > UPnP to open the following screen.
Figure 52 Applications > UPnP
The following table describes the fields in this screen.
Table 32 Applications > UPnP
LABEL DESCRIPTION
UPnP Select Enable to activate UPnP. Be aware that anyone could use a UPnP application to
open the web configurator's login screen without entering the NBG6604's IP address
(although you must still enter the password to access the web configurator).
Apply Click Apply to save the setting to the NBG6604.
Cancel Click Cancel to return to the previously saved settings.