Instructions

Chapter 10 Wireless LAN
NBG6604 User’s Guide
72
Figure 41 Wireless > Security Mode: WPA-PSK/WPA2-PSK
The following table describes the labels in this screen.
10.4 Guest Wireless Screen
This screen allows you to enable and configure multiple guest wireless network settings on the NBG6604.
Table 23 Wireless > Security Mode: WPA-PSK/WPA2-PSK
LABEL DESCRIPTION
Security Mode Select WPA-PSK or WPA2-PSK to enable data encryption.
WPA-PSK
Compatible
This field appears when you choose WPA2-PSK as the Security Mode.
Check this field to allow wireless devices using WPA-PSK security mode to connect to your
NBG6604.
PMF Protected Management Frames (PMF) is a protection mechanism of action management
frames.
Check this field to allow wireless devices using the PMF protection mechanism to connect to
your NBG6604.
Pre-Shared Key WPA-PSK/WPA2-PSK uses a simple common password for authentication.
Type a pre-shared key from 8 to 63 case-sensitive keyboard characters.
Group Key Update
Timer
The Group Key Update Timer is the rate at which the AP sends a new group key out to all
clients.
The default is 3600 seconds (60 minutes).
Apply Click Apply to save your changes back to the NBG6604.
Cancel Click Cancel to reload the previous configuration for this screen.