Instructions

Chapter 9 WAN
NBG6604 User’s Guide
54
Figure 30 WAN > Internet Connection: IPoE Encapsulation (IPv4 Only)
The following table describes the labels in this screen.
Table 14 Network > WAN > Internet Connection: IPoE Encapsulation
LABEL DESCRIPTION
ISP Parameters for Internet Access
Encapsulation You must choose the IPoE option when the WAN port is used as a regular Ethernet.
IPv4 Select IPv4 Only if you want the NBG6604 to run IPv4 only.
Select Dual Stack to allow the NBG6604 to run IPv4.
IP Address
Obtain an IP Address
Automatically (DHCP)
Select this option if your ISP did not assign you a fixed IP address. This is the default
selection.
Static IP Address Select this option if the ISP assigned a fixed IP address.
IP Address Enter your WAN IP address in this field if you selected Static IP Address.
Subnet Mask Enter the Subnet Mask in this field.
Default Gateway Enter a gateway IP address (if your ISP gave you one) in this field.
MTU Size Enter the MTU (Maximum Transmission Unit) size for each packet. If a larger packet arrives,
the NBG6604 divides it into smaller fragments.
DNS Server