Instructions

Chapter 9 WAN
NBG6604 User’s Guide
53
Figure 29 Auto-IP-Change Example
Auto-IP-Change only works under the following conditions:
• The NBG6604 must be in Router Mode (see Section 14.11 on page 98 for more information) for Auto-IP-
Change to become active.
• The NBG6604 is set to receive a dynamic WAN IP address.
9.4 Internet Connection Screen
Use this screen to change your NBG6604’s Internet access settings. Click WAN > Internet Connection.
9.4.1 IPoE Encapsulation
This screen displays when you select IPoE encapsulation.
LAN WAN
192.168.1.1 192.168.1.23
10.0.0.1
Internet