Instructions

Chapter 7 Tutorials
NBG6604 User’s Guide
45
For example, you may set up three wireless networks (A, B, and C) in your office. A is for workers, B is for
guests, and C is specific to a VoIP device in the meeting room.
7.4.1 Configuring Security Settings of Guest SSIDs
The NBG6604 is in router mode by default.
This example shows you how to configure the SSIDs with the following parameters on your NBG6604 (in
router mode).
Note: This tutorial assumes that you have disabled WPS in Wireless > WPS. Otherwise, the
“WPA-PSK” security type is not available to configure.
1 Connect your computer to the LAN port of the NBG6604 using an Ethernet cable.
2 The default IP address of the NBG6604 in router mode is “192.168.1.1”. In this case, your computer must
have an IP address in the range between “192.168.1.2” and “192.168.1.254”.
A
SSID_Worker
B
SSID_Guest
C
SSID_VoIP
Internet
M ODEM
SSID SECURITY TYPE KEY
SSID_Worker WPA2-PSK
WPA Compatible
DoNotStealMyWirelessNetwork
SSID_VoIP WPA-PSK VoIPOnly12345678
SSID_Guest WPA-PSK keyexample123