Instructions

Chapter 6 Access Point Mode
NBG6604 User’s Guide
34
6.4 AP Mode Status Screen
Click Status to open the Status screen.
Figure 21 Status > System Status: Access Point Mode
The following table describes the labels shown in the Status screen.
Table 11 Status > System Status: Access Point Mode
LABEL DESCRIPTION
Device Information
Host Name This is the System Name you enter in the Maintenance > General screen. It is for
identification purposes.
Model Number This is the model name of your device.
Firmware Version This is the firmware version and the date created.
Sys OP Mode This is the device mode (Section 4.1.1 on page 25) to which the NBG6604 is set - AP
Mode.
LAN Information
MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
IP Address This shows the LAN port’s IP address.
IP Subnet Mask This shows the LAN port’s subnet mask.
DHCP This shows the LAN port’s DHCP role - Client or None.
WLAN 2.4G Information
WLAN OP Mode This is the device mode (Section 4.1.1 on page 25) to which the NBG6604’s wireless LAN is
set - Access Point Mode.
MAC Address This shows the 2.4GHz wireless adapter MAC Address of your device.
SSID This shows a descriptive name used to identify the NBG6604 in the 2.4GHz wireless LAN.
Channel This shows the channel number which you select manually.
Security This shows the level of wireless security the NBG6604 is using.