Instructions

Chapter 5 Router Mode
NBG6604 User’s Guide
28
5.2.1 Navigation Panel
Use the sub-menus on the navigation panel to go to Web Configurator screens.
WLAN OP Mode This is the device mode (Section 4.1.1 on page 25) to which the NBG6604’s wireless LAN is
set - Access Point Mode.
MAC Address This shows the 2.4GHz wireless adapter MAC Address of your device.
SSID This shows a descriptive name used to identify the NBG6604 in the 2.4GHz wireless LAN.
Channel This shows the channel number which you select manually.
Security This shows the level of wireless security the NBG6604 is using.
WLAN 5G Information
WLAN OP Mode This is the device mode (Section 4.1.1 on page 25) to which the NBG6604’s wireless LAN is
set - Access Point Mode.
MAC Address This shows the 5GHz wireless adapter MAC Address of your device.
SSID This shows a descriptive name used to identify the NBG6604 in the 5GHz wireless LAN.
Channel This shows the channel number which you select manually.
Security This shows the level of wireless security the NBG6604 is using.
Firewall This shows whether the firewall is enabled or not.
System Status
System Up Time This is the total time the NBG6604 has been on.
Current Date/Time This field displays your NBG6604’s present date and time.
System Resource
- CPU Usage This displays what percentage of the NBG6604’s processing ability is currently used. When
this percentage is close to 100%, the NBG6604 is running at full load, and the throughput is
not going to improve anymore. If you want some applications to have more throughput,
you should turn off other applications.
- Memory Usage This shows what percentage of the heap memory the NBG6604 is using.
Interface Status
Interface This displays the NBG6604 port types. The port types are: WAN, LAN, and WLAN.
Status For the LAN and WAN ports, this field displays Down (line is down) or Up (line is up or
connected).
For the 2.4GHz/5GHz WLAN, it displays Up when the 2.4GHz/5GHz WLAN is enabled or
Down when the 2.4G/5G WLAN is disabled.
Rate For the LAN ports, this displays the port speed and duplex setting or is left blank when the
line is disconnected.
For the WAN port, it displays the port speed and duplex setting if you’re using Ethernet
encapsulation. This field displays N/A when the line is disconnected.
For the 2.4GHz/5GHz WLAN, it displays the maximum transmission rate when the 2.4GHz/
5GHz WLAN is enabled and N/A when the WLAN is disabled.
Table 9 Status > System Status: Router Mode (continued)
LABEL DESCRIPTION