Instructions

Chapter 1 Introduction
NBG6604 User’s Guide
11
Note: You must activate WPS in the NBG6604 and in another wireless device within two
minutes of each other.
1.7 LEDs
Figure 1 Top Panel
Table 1 Top Panel LEDs
FUNCTION COLOR STATUS BEHAVIOR
Power/SYS
White
On The NBG6604 is ready.
Off The NBG6604 is powered off.
Blinking The firmware is being updated and restored. System is
booting.
Internet White On The IP connection is available but no traffic.
Off The IP connection is not available.
Blinking The NBG6604 is transmitting/Receiving traffic.
WLAN 5G White Amber On The WLAN interface is enabled.
Off The WLAN interface is disabled.
White blinking The NBG6604 is transmitting/receiving data.
Amber blinking The WPS process is in progress (at the same time, disable the
white LED).
Amber steady off The WPS process is inactive.
WLAN 5GHz
WPS
2.4G
5G