Instructions

NBG6604 User’s Guide
101
CHAPTER 15
Troubleshooting
15.1 Overview
This chapter offers some suggestions to solve problems you might encounter. The potential problems are
divided into the following categories.
• Power, Hardware Connections, and LEDs
• NBG6604 Access and Login
• Internet Access
• Resetting the NBG6604 to Its Factory Defaults
• Wireless Connections
15.2 Power, Hardware Connections, and LEDs
The NBG6604 does not turn on. None of the LEDs turn on.
1 Make sure you are using the power adaptor or cord included with the NBG6604.
2 Make sure the power adaptor or cord is connected to the NBG6604 and plugged in to an appropriate
power source. Make sure the power source is turned on.
3 Disconnect and re-connect the power adaptor or cord to the NBG6604.
4 If the problem continues, contact the vendor.
One of the LEDs does not behave as expected.
1 Make sure you understand the normal behavior of the LED. See Section 1.7 on page 11.
2 Check the hardware connections. See the Quick Start Guide.
3 Inspect your cables for damage. Contact the vendor to replace any damaged cables.
4 Disconnect and re-connect the power adaptor to the NBG6604.
5 If the problem continues, contact the vendor.