Operation Manual

Chapter 4 AP Mode

NBG334S User’s Guide

4.3.1 Navigation Panel

Use the menu in the navigation panel to configure NBG334S features in AP Mode.

The following screen and table show the features you can configure in AP Mode.

Figure 31 Menu: AP Mode

The following table describes the sub-menus.

Rate For the LAN ports, this displays the port speed and duplex setting or N/A when the

line is disconnected.

For the WLAN, it displays the maximum transmission rate when the WLAN is

enabled and N/A when the WLAN is disabled.

Summary

Any IP Table Use this screen to view details of IP addresses assigned to devices not in the same

subnet as the NBG334S.

Packet Statistics Use this screen to view port status and packet specific statistics.

WLAN Station Status Use this screen to view the wireless stations that are currently associated to the

NBG334S.

Table 22 Web Configurator Status Screen (continued)

LABEL DESCRIPTION

Table 23 Screens Summary

LINK TAB FUNCTION

Status This screen shows the NBG334S’s general device, system and

interface status information. Use this screen to access the wizard,

and summary statistics tables.

Network

Wireless

LAN

General Use this screen to configure wireless LAN.

MAC Filter Use the MAC filter screen to configure the NBG334S to block

access to devices or block the devices from accessing the

NBG334S.

Advanced This screen allows you to configure advanced wireless settings.

QoS Use this screen to configure Wi-Fi Multimedia Quality of Service

(WMM QoS). WMM QoS allows you to prioritize wireless traffic

according to the delivery requirements of individual services.