Operation Manual

NBG334S User’s Guide
203
CHAPTER 23
Troubleshooting
This chapter offers some suggestions to solve problems you might encounter. The potential
problems are divided into the following categories.
• Power, Hardware Connections, and LEDs
• NBG334S Access and Login
• Internet Access
• Resetting the NBG334S to Its Factory Defaults
• Wireless Router/AP Troubleshooting
• Advanced Features
23.1 Power, Hardware Connections, and LEDs
V The NBG334S does not turn on. None of the LEDs turn on.
7 Make sure you are using the power adaptor or cord included with the NBG334S.
8 Make sure the power adaptor or cord is connected to the NBG334S and plugged in to an
appropriate power source. Make sure the power source is turned on.
9 Disconnect and re-connect the power adaptor or cord to the NBG334S.
10 If the problem continues, contact the vendor.
V One of the LEDs does not behave as expected.
1 Make sure you understand the normal behavior of the LED. See Section 1.7 on page 31.
2 Check the hardware connections. See the Quick Start Guide.
3 Inspect your cables for damage. Contact the vendor to replace any damaged cables.
4 Disconnect and re-connect the power adaptor to the NBG334S.
5 If the problem continues, contact the vendor.