Operation Manual

NBG334S User’s Guide
199
CHAPTER 22
Sys Op Mode
22.1 Overview
The Sys Op Mode (System Operation Mode) function lets you configure whether your
NBG334S is a router or AP. You can choose between Router Mode and AP Mode depending
on your network topology and the features you require from your device. See Section 1.1 on
page 29 for more information on which mode to choose.
22.1.1 Router
A router connects your local network with another network, such as the Internet. The router
has two IP addresses, the LAN IP address and the WAN IP address.
Figure 116 LAN and WAN IP Addresses in Router Mode
22.1.2 AP
An AP extends one network and so has just one IP address. All Ethernet ports on the AP have
the same IP address. To connect to the Internet, another device, such as a router, is required.
LAN IP
WAN IP
Internet
LAN
WAN