Operation Manual

Chapter 15 Bandwidth Management
NBG334S User’s Guide
151
15.9.1 Rule Configuration
If you want to edit a bandwidth management rule for other applications and/or subnets, click
the Edit icon in the Application List or User-defined Service table of the Advanced screen.
The following screen displays.
Figure 80 Management > Bandwidth MGMT > Advanced: User-defined Service Rule
Configuration
The following table describes the labels in this screen
Table 63 Management > Bandwidth MGMT > Advanced: User-defined Service Rule
Enable Select this check box to have the NBG334S apply this bandwidth management
rule.
Direction Select To LAN to apply bandwidth management to traffic that the NBG334S
forwards to the LAN.
Select To WAN to apply bandwidth management to traffic that the NBG334S
forwards to the WAN.
Select To WLAN to apply bandwidth management to traffic that the NBG334S
forwards to the WLAN.
Service Name Enter a descriptive name of up to 19 alphanumeric characters, including spaces.
Priority Select a priority from the drop down list box. Choose High, Mid or Low.
Modify Click the Edit icon to open the Rule Configuration screen. Modify an existing rule
or create a new rule in the Rule Configuration screen. See Section 15.9.1 on
page 151 for more information.
Click the Remove icon to delete a rule.
Apply Click Apply to save your customized settings.
Reset Click Reset to begin configuring this screen afresh.
Table 62 Management > Bandwidth MGMT > Advanced (continued)
LABEL DESCRIPTION