User Manual
Table Of Contents
- NBG-418N v2
- User’s Guide
- Introduction
- The Web Configurator
- Connection Wizard
- Modes
- Tutorials
- 5.1 Overview
- 5.2 How to Connect to the Internet from an AP
- 5.3 Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client
- 5.4 Enable and Configure Wireless Security without WPS on your NBG-418N v2
- 5.5 Using Multiple SSIDs on the NBG-418N v2
- 5.6 Installing UPnP in Windows 7 Example
- 5.7 Using Bandwidth Management on the NBG-418N v2
- Technical Reference
- Wireless LAN
- WAN
- LAN
- DHCP Server
- Network Address Translation
- Dynamic DNS
- Static Route
- Firewall
- Content Filter
- Remote Management
- Universal Plug-and-Play (UPnP)
- Bandwidth MGMT
- System
- Logs
- Tools
- Sys OP Mode
- Language
- Troubleshooting
- Customer Support
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Setting Up Your Computer’s IP Address
- Wireless LANs
- Common Services
- Legal Information
- Index
Chapter 7 WAN
NBG-418N v2 User’s Guide
85
The following table describes the labels in this screen.
Fig ure 62 Network > WAN > IPv6 (Static IPv6)
The following table describes the labels in this screen.
Table 36 Network > WAN > IPv6 (Link-local Only)
LABEL DESCRIPTION
IPv6 Connection
Type
Select Link- lo c a l only to allow NBG-418N v2 to communicate with neighboring devices on
the same link. This mode enables IPv6-capable devices to communicate with each other in
the LAN side.
LAN IPv6 Link-Local
Address
This shows the IPv6 Link-local address in the LAN side. This is used by routers when
communicating with neighboring devices on the same link. It allows IPv6-capable devices
to communicate with each other in the LAN side.i
Apply Click Apply to save your changes back to the NBG-418N v2.
Reset Click Re se t to begin configuring this screen afresh.
Table 37 Network > WAN > IPv6 (Static IPv6)
LABEL DESCRIPTION
IPv6 Connection
Type
Select Sta tic IPv6 when your ISP provides you a set IPv6 address that does not change. You
must also enter the IPv6 address, Subnet Prefix Length, Default Gateway, Primary and
Secondary DNS Server provided by your ISP.
Wan IPv6 Address Settings
IPv6 Address Enter the IPv6 address on the WAN side in this field.
Subnet Prefix Length Enter the address prefix length to specify how many most significant bits in an IPv6 address
compose the network address.