User Manual
Table Of Contents
- NBG-418N v2
- User’s Guide
- Introduction
- The Web Configurator
- Connection Wizard
- Modes
- Tutorials
- 5.1 Overview
- 5.2 How to Connect to the Internet from an AP
- 5.3 Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client
- 5.4 Enable and Configure Wireless Security without WPS on your NBG-418N v2
- 5.5 Using Multiple SSIDs on the NBG-418N v2
- 5.6 Installing UPnP in Windows 7 Example
- 5.7 Using Bandwidth Management on the NBG-418N v2
- Technical Reference
- Wireless LAN
- WAN
- LAN
- DHCP Server
- Network Address Translation
- Dynamic DNS
- Static Route
- Firewall
- Content Filter
- Remote Management
- Universal Plug-and-Play (UPnP)
- Bandwidth MGMT
- System
- Logs
- Tools
- Sys OP Mode
- Language
- Troubleshooting
- Customer Support
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Setting Up Your Computer’s IP Address
- Wireless LANs
- Common Services
- Legal Information
- Index
Chapter 7 WAN
NBG-418N v2 User’s Guide
82
This screen displays when you select PPTP encapsulation.
Fig ure 58 Network > WAN > Internet Connection: PPTP Encapsulation
The following table describes the labels in this screen.
Table 33 Network > WAN > Internet Connection: PPTP Encapsulation
LABEL DESCRIPTION
ISP Parameters for Internet Access
Connection
Type
To configure a PPTP client, you must configure the Use r Nam e and Pa ssword fields for a PPP
connection and the PPTP parameters for a PPTP connection.
User Name Type the user name given to you by your ISP.
Password Type the password associated with the User Name above.
Server IP Address Type the IP address of the PPTP server.
DNS Servers
Attain DNS
Automatically/
Set DNS
Manually
Click Atta in DNS Automatic a lly radio button if your ISP dynamically assigns DNS server
information (and the NBG-418N v2’s WAN IP address). Or click Se t DNS Manually if you have if
you have the IP address of a DNS server.
First DNS Server
Second DNS
Server
Enter the first and second DNS server's IP address in the box fields.
WAN MAC Address
The MAC address section allows users to configure the WAN port's MAC address by either using the NBG-418N v2’s
MAC address, copying the MAC address from a computer on your LAN or manually entering a MAC address.
Factory default Select this option to use the factory assigned default MAC Address.
Clone the
computer's MAC
address - MAC
Address
Select this option to clone the MAC address of the computer (displaying in the screen) from
which you are configuring the NBG-418N v2. Once it is successfully configured, the address will
be copied to the rom file. It will not change unless you change the setting or upload a different
ROM file.