User Manual
Table Of Contents
- NBG-418N v2
- User’s Guide
- Introduction
- The Web Configurator
- Connection Wizard
- Modes
- Tutorials
- 5.1 Overview
- 5.2 How to Connect to the Internet from an AP
- 5.3 Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client
- 5.4 Enable and Configure Wireless Security without WPS on your NBG-418N v2
- 5.5 Using Multiple SSIDs on the NBG-418N v2
- 5.6 Installing UPnP in Windows 7 Example
- 5.7 Using Bandwidth Management on the NBG-418N v2
- Technical Reference
- Wireless LAN
- WAN
- LAN
- DHCP Server
- Network Address Translation
- Dynamic DNS
- Static Route
- Firewall
- Content Filter
- Remote Management
- Universal Plug-and-Play (UPnP)
- Bandwidth MGMT
- System
- Logs
- Tools
- Sys OP Mode
- Language
- Troubleshooting
- Customer Support
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Setting Up Your Computer’s IP Address
- Wireless LANs
- Common Services
- Legal Information
- Index
Chapter 7 WAN
NBG-418N v2 User’s Guide
78
Fig ure 56 Network > WAN > Internet Connection: Ethernet Encapsulation
The following table describes the labels in this screen.
Table 31 Network > WAN > Internet Connection: Ethernet Encapsulation
LABEL DESCRIPTION
ISP Parameters for Internet Access (Ethernet Static)
Connection Type Choose the Ethe rne t (Sta tic ) option when the WAN port is used as a regular Ethernet.
IP Address Enter your WAN IP a ddre ss in this field.
IP Subnet Mask Enter the IP Subne t Mask in this field.
Gateway IP
Address
Enter a Ga te way IP Addre ss (if your ISP gave you one) in this field.
MTU Size Type the MTU or maximum size of each data packet, in bytes, that can move through this
interface. If a larger packet arrives, the NBG-418N v2 divides it into smaller fragments. Allowed
values are 576 to 1500. By default this value is 1500