User Manual
Table Of Contents
- NBG-418N v2
- User’s Guide
- Introduction
- The Web Configurator
- Connection Wizard
- Modes
- Tutorials
- 5.1 Overview
- 5.2 How to Connect to the Internet from an AP
- 5.3 Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client
- 5.4 Enable and Configure Wireless Security without WPS on your NBG-418N v2
- 5.5 Using Multiple SSIDs on the NBG-418N v2
- 5.6 Installing UPnP in Windows 7 Example
- 5.7 Using Bandwidth Management on the NBG-418N v2
- Technical Reference
- Wireless LAN
- WAN
- LAN
- DHCP Server
- Network Address Translation
- Dynamic DNS
- Static Route
- Firewall
- Content Filter
- Remote Management
- Universal Plug-and-Play (UPnP)
- Bandwidth MGMT
- System
- Logs
- Tools
- Sys OP Mode
- Language
- Troubleshooting
- Customer Support
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Setting Up Your Computer’s IP Address
- Wireless LANs
- Common Services
- Legal Information
- Index
Chapter 6 Wireless LAN
NBG-418N v2 User’s Guide
72
The following table describes the labels in this screen.
6.10 MBSSID Sc re e n
Use this screen to enable and set multiple SSIDs (MBSSID) on the NBG-418N v2. You can then assign
varying security types to different SSIDs. Wireless clients can use different SSIDs to associate with the NBG-
418N v2. Click Ne twork > Wire le ss LAN > MBSSID to open the following screen.
Fig ure 52 Network > Wireless LAN > MBSSID
Table 27 Network > Wireless LAN > Scheduling
LABEL DESCRIPTION
Enable Wireless
LAN Scheduling
Select this to enable Wireless LAN scheduling.
Action Select O n or O ff to specify whether the Wireless LAN is turned on or off. This field works in
conjunction with the Day and Exc e pt for the following time s fields.
Day Select Eve ryda y or the specific days to turn the Wireless LAN on or off. If you select Eve ryda y
you can not select any specific days. This field works in conjunction with the Exc e pt for the
following tim e s field.
Except for the
following times
Select a begin time using the first set of hour and minute (min) drop down boxes and select an
end time using the second set of hour and minute (m in) drop down boxes. If you have chosen
On earlier for the WLAN Status the Wireless LAN will turn off between the two times you enter in
these fields. If you have chosen Off earlier for the WLAN Status the Wireless LAN will turn on
between the two times you enter in these fields.
Note: Entering the same begin time and end time will mean the whole day.
Apply Click Apply to save your changes back to the NBG-418N v2.
Reset Click Re se t to reload the previous configuration for this screen.