User Manual

Chapter 6 Wireless LAN
NBG-418N v2 User’s Guide
61
6.2 Wha t You Ca n Do
Wireless screens vary according to the device mode you are using.
See
Chapter 4 on page 28 for more information on device modes.
• Use the Ge nera l screen to enable the Wireless LAN, enter the SSID and select the wireless security
mode (
Section 6.4 on page 63).
• Use the MAC Filte r screen to allow or deny wireless stations based on their MAC addresses from
connecting to the NBG-418N v2 (Section 6.5 on page 68).
• Use the Adva nc e d screen to allow intra-BSS networking and set the RTS/CTS Threshold (
Section 6.6 on
page 69
).
• Use the WPS screen to quickly set up a wireless network with strong security, without having to
configure security settings manually (Section 6.7 on page 69).
• Use the WPS Sta tion screen to add a wireless station using WPS (
Section 6.8 on page 70).
• Use the Sc he duling screen to set the times your wireless LAN is turned on and off (
Section 6.9 on page
71
).
• Use the MBSSID screen to configure multiple wireless networks on the NBG-418N v2 (
Section 6.10 on
page 72
).
• Use the AP Se le c t screen to choose an access point that you want the NBG-418N v2 (in universal
repeater mode) to connect to. You should know the security settings of the target AP (Section 6.11 on
page 73
).
• Use the WLAN Info rma tio n screen to view the SSID and security of the selected AP wireless network
(Section 6.12 on page 74).
Wireless Screen Router Access Point Universal Repeater Client Bridge
General

MAC Filter

Advanced

WPS

WPS Station

Scheduling

MBSSID

AP Select

WLAN Information
