User Manual
Table Of Contents
- NBG-418N v2
- User’s Guide
- Introduction
- The Web Configurator
- Connection Wizard
- Modes
- Tutorials
- 5.1 Overview
- 5.2 How to Connect to the Internet from an AP
- 5.3 Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client
- 5.4 Enable and Configure Wireless Security without WPS on your NBG-418N v2
- 5.5 Using Multiple SSIDs on the NBG-418N v2
- 5.6 Installing UPnP in Windows 7 Example
- 5.7 Using Bandwidth Management on the NBG-418N v2
- Technical Reference
- Wireless LAN
- WAN
- LAN
- DHCP Server
- Network Address Translation
- Dynamic DNS
- Static Route
- Firewall
- Content Filter
- Remote Management
- Universal Plug-and-Play (UPnP)
- Bandwidth MGMT
- System
- Logs
- Tools
- Sys OP Mode
- Language
- Troubleshooting
- Customer Support
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Setting Up Your Computer’s IP Address
- Wireless LANs
- Common Services
- Legal Information
- Index
Chapter 5 Tutorials
NBG-418N v2 User’s Guide
55
7 A window appears asking you to select Wizard or Advance mode. Click G o to Adva nc e d Se tup in the
navigation panel.
8 Go to Ne twork > Wire le ss LAN > MBSSID. Type SSID_Worke rs in the Name (SSID) field, select WPA2-
PSK(AES) in the Security drop-down list, enter the pre-share key and click Apply.
9 Go to Ne twork > Wire le ss LAN > Adva nc e d and click enable Intra- BSS Tra ffic to allow wireless clients in
the same wireless network to communicate with each other. Click Apply.
10 To create the SSID_VoIP, go to Ne twork > Wire le ss LAN > MBSSID. click the radio button next to sc he me 2
and Type SSID_Voip in the Name (SSID) field, select WPA-PSK in the Security drop-down list, enter the pre-
share key and click Apply.