User Manual
Table Of Contents
- NBG-418N v2
- User’s Guide
- Introduction
- The Web Configurator
- Connection Wizard
- Modes
- Tutorials
- 5.1 Overview
- 5.2 How to Connect to the Internet from an AP
- 5.3 Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client
- 5.4 Enable and Configure Wireless Security without WPS on your NBG-418N v2
- 5.5 Using Multiple SSIDs on the NBG-418N v2
- 5.6 Installing UPnP in Windows 7 Example
- 5.7 Using Bandwidth Management on the NBG-418N v2
- Technical Reference
- Wireless LAN
- WAN
- LAN
- DHCP Server
- Network Address Translation
- Dynamic DNS
- Static Route
- Firewall
- Content Filter
- Remote Management
- Universal Plug-and-Play (UPnP)
- Bandwidth MGMT
- System
- Logs
- Tools
- Sys OP Mode
- Language
- Troubleshooting
- Customer Support
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Setting Up Your Computer’s IP Address
- Wireless LANs
- Common Services
- Legal Information
- Index
Chapter 5 Tutorials
NBG-418N v2 User’s Guide
48
Fig ure 32 Example WPS Process: PBC Method
5.3.2 PIN Configura tion
When you use the PIN configuration method, you need to use both NBG-418N v2’s configuration
interface and the client’s utilities.
1 Launch your wireless client’s configuration utility. Go to the WPS settings and select the PIN method to
get a PIN number.
2 Enter the PIN number to the PIN field in the Ne twork > Wire le ss LAN > WPS Sta tion screen on the NBG-
418N v2.
3 Click the Sta rt buttons (or button next to the PIN field) on both the wireless client utility screen and the
NBG-418N v2’s WPS Sta tion screen within two minutes.
The NBG-418N v2 authenticates the wireless client and sends the proper configuration settings to the
wireless client. This may take up to two minutes. Then the wireless client is able to communicate with the
NBG-418N v2 securely.
The following figure shows you the example to set up wireless network and security on NBG-418N v2 and
wireless client (ex. NWD210N in this example) by using PIN method.
Wireless Client
NBG-418N v2
SECURITY INFO
COMMUNICATION
WITHIN 2 MINUTES
WPS/ Reset