User Manual
Table Of Contents
- NBG-418N v2
- User’s Guide
- Introduction
- The Web Configurator
- Connection Wizard
- Modes
- Tutorials
- 5.1 Overview
- 5.2 How to Connect to the Internet from an AP
- 5.3 Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client
- 5.4 Enable and Configure Wireless Security without WPS on your NBG-418N v2
- 5.5 Using Multiple SSIDs on the NBG-418N v2
- 5.6 Installing UPnP in Windows 7 Example
- 5.7 Using Bandwidth Management on the NBG-418N v2
- Technical Reference
- Wireless LAN
- WAN
- LAN
- DHCP Server
- Network Address Translation
- Dynamic DNS
- Static Route
- Firewall
- Content Filter
- Remote Management
- Universal Plug-and-Play (UPnP)
- Bandwidth MGMT
- System
- Logs
- Tools
- Sys OP Mode
- Language
- Troubleshooting
- Customer Support
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Setting Up Your Computer’s IP Address
- Wireless LANs
- Common Services
- Legal Information
- Index
Chapter 4 Modes
NBG-418N v2 User’s Guide
37
Fig ure 25 Status Screen (AP Mode)
The following table describes the labels shown in the Status screen.
Table 12 Status Screen (AP Mode)
LABEL DESCRIPTION
Device Information
System Name This is the Syste m Na me you enter in the Mainte na nc e > Syste m > Ge ne ral screen. It is for
identification purposes.
Firmware Version This is the current firmware version of the NBG-418N v2.
LAN Information
- MAC Address This shows the LAN Ethernet adapter MAC Address of your device.
- IP Address This shows the LAN port’s IP address.
- IP Subnet Mask This shows the LAN port’s subnet mask.
- DHCP Server This shows the LAN port’s DHCP server status.
WLAN Information
- MAC Address This shows the wireless adapter MAC Address of your device.
- Status This shows the current status of the Wireless LAN - On, Off, or O ff by sc he dule r.
- Name (SSID) This shows a descriptive name used to identify the NBG-418N v2 in the wireless LAN.
- Channel This shows the channel number which you select manually or the NBG-418N v2
automatically scans and selects.
- Operating Channel This shows the channel number which the NBG-418N v2 is currently using over the
wireless LAN.
- Security Mode This shows the level of wireless security the NBG-418N v2 is using.
- 802.11 Mode This shows the IEEE 802.11 standard that the NBG-418N v2 supports. Wireless clients must
support the same standard in order to be able to connect to the NBG-418N v2
- WPS This shows the WPS (WiFi Protected Setup) Status. Click the status to display Ne two rk >
Wire le ss LAN > WPS screen.
System Status