User Manual
Table Of Contents
- NBG-418N v2
- User’s Guide
- Introduction
- The Web Configurator
- Connection Wizard
- Modes
- Tutorials
- 5.1 Overview
- 5.2 How to Connect to the Internet from an AP
- 5.3 Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client
- 5.4 Enable and Configure Wireless Security without WPS on your NBG-418N v2
- 5.5 Using Multiple SSIDs on the NBG-418N v2
- 5.6 Installing UPnP in Windows 7 Example
- 5.7 Using Bandwidth Management on the NBG-418N v2
- Technical Reference
- Wireless LAN
- WAN
- LAN
- DHCP Server
- Network Address Translation
- Dynamic DNS
- Static Route
- Firewall
- Content Filter
- Remote Management
- Universal Plug-and-Play (UPnP)
- Bandwidth MGMT
- System
- Logs
- Tools
- Sys OP Mode
- Language
- Troubleshooting
- Customer Support
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Setting Up Your Computer’s IP Address
- Wireless LANs
- Common Services
- Legal Information
- Index
Chapter 4 Modes
NBG-418N v2 User’s Guide
35
WAN Internet
Connection
This screen allows you to configure ISP parameters, WAN IP address
assignment, DNS servers and the WAN MAC address.
Advanced Use this screen to configure multicast WAN and auto IP setup.
IPv6 Use this screen to set the IPv6 WAN connection type, and LAN/WAN IPv6
address settings.
LAN IP Use this screen to configure LAN IPv4 address and subnet mask.
DHCP
Server
General Use this screen to enable the NBG-418N v2’s DHCP server.
Advanced Use this screen to assign IP addresses to specific individual computers based
on their MAC addresses and to have DNS servers assigned by the DHCP server.
Client List Use this screen to view current DHCP client information and to always assign
an IP address to a MAC address (and host name).
NAT General Use this screen to enable NAT.
Application Use this screen to configure servers behind the NBG-418N v2.
Port Triggering Use this screen to configure port triggering settings on the NBG-418N v2.
DDNS General Use this screen to configure Dynamic DNS, a service that allows you to map a
fixed domain name to a non-fixed IP address.
Static Route IP Static Route Use this screen to configure IP static routes.
Security
Firewall General Use this screen to activate/deactivate the firewall.
Services Use this screen to enable or disable ICMP and VPN passthrough features.
Content
Filter
Filter Use this screen to configure content filter settings on the NBG-418N v2.
Management
Remote
MGMT
WWW Use this screen to configure through which interface(s) and from which IP
address(es) users can use HTTP to manage the NBG-418N v2.
UPnP General Use this screen to enable UPnP on the NBG-418N v2.
Bandwidth
MGMT
General Use this screen to enable bandwidth management on the NBG-418N v2.
Advanced Use this screen to set the upstream bandwidth and edit a bandwidth
management rule.
Maintenance
System General Use this screen to view and change administrative settings such as system and
domain names, password and inactivity timer.
Time Setting Use this screen to change your NBG-418N v2’s time and date.
Logs View Log Use this screen to view the logs for the categories that you selected.
Tools Firmware Use this screen to upload firmware to your NBG-418N v2.
Configuration Use this screen to backup and restore the configuration or reset the factory
defaults to your NBG-418N v2.
Restart This screen allows you to reboot the NBG-418N v2 without turning the power
off.
Sys OP
Mode
General This screen allows you to select the device operating mode.
Language Language This screen allows you to select the language you prefer.
Table 11 Menus: Router Mode (continued)
LINK TAB FUNCTION