User Manual
Table Of Contents
- NBG-418N v2
- User’s Guide
- Introduction
- The Web Configurator
- Connection Wizard
- Modes
- Tutorials
- 5.1 Overview
- 5.2 How to Connect to the Internet from an AP
- 5.3 Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client
- 5.4 Enable and Configure Wireless Security without WPS on your NBG-418N v2
- 5.5 Using Multiple SSIDs on the NBG-418N v2
- 5.6 Installing UPnP in Windows 7 Example
- 5.7 Using Bandwidth Management on the NBG-418N v2
- Technical Reference
- Wireless LAN
- WAN
- LAN
- DHCP Server
- Network Address Translation
- Dynamic DNS
- Static Route
- Firewall
- Content Filter
- Remote Management
- Universal Plug-and-Play (UPnP)
- Bandwidth MGMT
- System
- Logs
- Tools
- Sys OP Mode
- Language
- Troubleshooting
- Customer Support
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Setting Up Your Computer’s IP Address
- Wireless LANs
- Common Services
- Legal Information
- Index
NBG-418N v2 User’s Guide
28
C HAPTER 4
Mode s
4.1 Ove rvie w
You can set up the NBG-418N v2 with other IEEE 802.11b/g/n compatible devices in different device
modes.
Note: Choose your device mode carefully to avoid having to change it later. The NBG-418N
v2 automatically restarts when you change modes.
The default LAN IP address of the NBG-418N v2 in Router mode is 192.168.1.1. The
default IP address of the NBG-418N v2 in other modes is 192.168.1.2.
• Route r: Use this mode if you want to use routing functions such as LAN DHCP, NAT, firewall and so on,
on the NBG-418N v2 (N). The NBG-418N v2 has separate LAN and WAN network IP addresses.
Connect the WAN port to an Internet Access Device (IAD) such as a broadband modem.
Fig ure 17 Router
• Ac c e ss Point: Use this mode if you already have a Router (R) in your network and you want to set up a
wireless network and bridge the wired and wireless connections on the NBG-416N.
Fig ure 18 AP Mode
LEW
WLAN
LAN
WAN
N
IAD
LEW
WLAN
LAN
WAN
N
R