User Manual
Table Of Contents
- NBG-418N v2
- User’s Guide
- Introduction
- The Web Configurator
- Connection Wizard
- Modes
- Tutorials
- 5.1 Overview
- 5.2 How to Connect to the Internet from an AP
- 5.3 Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client
- 5.4 Enable and Configure Wireless Security without WPS on your NBG-418N v2
- 5.5 Using Multiple SSIDs on the NBG-418N v2
- 5.6 Installing UPnP in Windows 7 Example
- 5.7 Using Bandwidth Management on the NBG-418N v2
- Technical Reference
- Wireless LAN
- WAN
- LAN
- DHCP Server
- Network Address Translation
- Dynamic DNS
- Static Route
- Firewall
- Content Filter
- Remote Management
- Universal Plug-and-Play (UPnP)
- Bandwidth MGMT
- System
- Logs
- Tools
- Sys OP Mode
- Language
- Troubleshooting
- Customer Support
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Setting Up Your Computer’s IP Address
- Wireless LANs
- Common Services
- Legal Information
- Index
Chapter 3 Connection Wizard
NBG-418N v2 User’s Guide
26
Note: The wireless stations and NBG-418N v2 must use the same SSID, channel ID, WPA-PSK (if
WPA-PSK is enabled) or WPA2-PSK (if WPA2-PSK is enabled) for wireless communication.
3.4 Conne c tion Wiza rd: STEP 3: Inte rne t Config ura tion
Click Apply to finish setting up your NBG-418N v2 to operate on your network and access the
Internet.This wizard screen varies according to the connection type that you select.
Fig ure 15 Wizard Step 3: Internet Configuration.
3.5 Conne c tion Wiza rd Comple te
Click Finish to complete the wizard setup.
WPA2-PSK AES Choose WPA2- PSK AES security to configure a Pre-Shared Key. Choose this option only if your
wireless clients support WPA2-PSK. You will need to enter a Pre-Shared Key in the box below.
Pre-Shared Key Type in a string of ASCII characters between 8 and 63 or hexadecimal characters between 8
and 64 for the Pre-Shared Key field.
Back Click Bac k to display the previous screen.
Next Click Ne xt to proceed to the next screen.
Exit Click Exit to close the wizard screen without saving.
Table 6 Wizard Step 2: Wireless LAN (continued)
LABEL DESCRIPTION