User Manual
Table Of Contents
- NBG-418N v2
- User’s Guide
- Introduction
- The Web Configurator
- Connection Wizard
- Modes
- Tutorials
- 5.1 Overview
- 5.2 How to Connect to the Internet from an AP
- 5.3 Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client
- 5.4 Enable and Configure Wireless Security without WPS on your NBG-418N v2
- 5.5 Using Multiple SSIDs on the NBG-418N v2
- 5.6 Installing UPnP in Windows 7 Example
- 5.7 Using Bandwidth Management on the NBG-418N v2
- Technical Reference
- Wireless LAN
- WAN
- LAN
- DHCP Server
- Network Address Translation
- Dynamic DNS
- Static Route
- Firewall
- Content Filter
- Remote Management
- Universal Plug-and-Play (UPnP)
- Bandwidth MGMT
- System
- Logs
- Tools
- Sys OP Mode
- Language
- Troubleshooting
- Customer Support
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Setting Up Your Computer’s IP Address
- Wireless LANs
- Common Services
- Legal Information
- Index
Chapter 3 Connection Wizard
NBG-418N v2 User’s Guide
24
Fig ure 13 Wizard Step 2: Static IP Connection
The following table describes the labels in this screen
Click Ne xt to configure the WLAN for the NBG-418N v2.
3.3 Conne c tion Wiza rd: STEP 2: Wire le ss LAN
Set up your wireless LAN using the following screen.
Table 5 Wizard Step 2: Static IP Connection
LABEL DESCRIPTION
IP Address Select this option if you were given IP address and/or DNS server settings by the ISP.
The fixed IP address should be in the same subnet as your broadband modem or
router.
Subnet Mask Enter the subnet mask address in this field.
Default Gateway Enter the gateway IP address provided by your ISP.
Primary DNS DNS (Domain Name System) is for mapping a domain name to its corresponding IP
address and vice versa. The DNS server is extremely important because without it, you
must know the IP address of a computer before you can access it. The NBG-418N v2
uses a system DNS server (in the order you specify here) to resolve domain names for
DDNS and the time server. Enter the primary DNS server’s IP address in this field.
Secondary DNS Enter the secondary DNS server’s IP address in this field. This field is optional.
Back Click Ba c k to return to the previous screen.
Next Click Ne xt to continue.
Exit Click Exit to close the wizard screen without saving.