User Manual
Table Of Contents
- NBG-418N v2
- User’s Guide
- Introduction
- The Web Configurator
- Connection Wizard
- Modes
- Tutorials
- 5.1 Overview
- 5.2 How to Connect to the Internet from an AP
- 5.3 Configure Wireless Security Using WPS on both your NBG-418N v2 and Wireless Client
- 5.4 Enable and Configure Wireless Security without WPS on your NBG-418N v2
- 5.5 Using Multiple SSIDs on the NBG-418N v2
- 5.6 Installing UPnP in Windows 7 Example
- 5.7 Using Bandwidth Management on the NBG-418N v2
- Technical Reference
- Wireless LAN
- WAN
- LAN
- DHCP Server
- Network Address Translation
- Dynamic DNS
- Static Route
- Firewall
- Content Filter
- Remote Management
- Universal Plug-and-Play (UPnP)
- Bandwidth MGMT
- System
- Logs
- Tools
- Sys OP Mode
- Language
- Troubleshooting
- Customer Support
- IP Addresses and Subnetting
- Pop-up Windows, JavaScripts and Java Permissions
- Setting Up Your Computer’s IP Address
- Wireless LANs
- Common Services
- Legal Information
- Index
Appendix D Setting Up Your Computer’s IP Address
NBG-418N v2 User’s Guide
202
Fig ure 140 openSUSE 10.3: Network Card Setup
6 Select Dyna mic Addre ss (DHCP) if you have a dynamic IP address.
Select Sta tic a lly a ssigne d IP Addre ss if you have a static IP address. Fill in the IP addre ss, Subne t ma sk,
and Hostna me fields.
7 Click Ne xt to save the changes and close the Ne twork Ca rd Se tup window.
8 If you know your DNS server IP address(es), click the Hostna me / DNS tab in Ne twork Se tting s and then
enter the DNS server information in the fields provided.